OPERATION OF YOUR ATV
89
Making Turns
To make a turn, steer in the direction of the turn, leaning your
upper body to the inside of the turn while supporting your weight
on the outer footrest. This technique alters the balance of traction
between the wheels, allowing turn to be made smoothly. The same
leaning technique should be used for turning in reverse.
NOTE
Practice making turns at slow speeds before attempting to
turn at faster speeds.
WARNING
Turning at sharp angles or at excessive speeds can result in
vehicle overturn and lead to serious injury. Avoid turning at sharp
angles. Never make turns at high speeds.
Support weight
on outer foot rest
Lean into
the turn
To Next Page
Loading...
Need help?
General
