OPERATION OF YOUR ATV
91
Driving in reverse
To operate in reverse:
1. Ensure the throttle is closed and the vehicle is stopped completely.
2. Apply the foot brake, then shift the transmission into reverse gear.
3. Check for obstacles or people behind the vehicle.
4. When it’s safe to proceed, release the brakes, slowly press the throttle with your right thumb, and back
slowly. Vehicle speed is controlled by the amount of throttle opening.
NOTE
Your Vehicle is equipped with a reverse speed limiter. The override button cannot be used. Do not operate
at wide open throttle. Open the throttle just enough to maintain a desired speed.
Follow these precautions when operating in reverse:
• Always avoid backing downhill.
• Back slowly.
• When in reverse, apply the brakes lightly for stopping.
• Avoid turning at sharp angles in reverse.
• Never open the throttle suddenly while backing.
WARNING
Failure to use caution when operating in reverse can result in serious injury or death.
To Next Page
Loading...
Need help?
General
