INSTALLATION INSTRUCTIONS FOR REMOTE CONTROL
REMOTE CONTROL
14 0 0 0 · E N GLI S H
PRINTED AND MANUFACTURED IN CANADA
One (1) remote control Two (2) magnets One (1) receiver module One (1) cable
The following components are necessary
2006-07-05
WARNING: The magnets are extremely powerful despite their small size. Use caution while installing and
handling to avoid injuries caused by a sudden movement of the magnets clinging together and possibly
pinching fingers, skin or other. Persons with physical conditions that could be affected by magnetic fields
should avoid using it and/or consult with their physician.
A. Determine appropriate location for the remote control in the bathtub.
R EMOTE CONTR OL INSTA LLA TION
1
Determine backside location of magnets
A. Hold the remote control in the chosen location.
B. From the exterior of the bathtub position the
supplied magnets, the attraction force will
guide you to the proper area and they will hold
in place.
C. Mark the position of the magnets with a marker
or pencil.
2
Install magnets on backside
A. Apply a dab of silicone to the magnets, place
and maintain in the premarked position.
B. Let dry in this position.
3
CAUTION: Magnets always have a positive and
negative side and will only be attracted to one
side. Consider this to avoid applying the silicone
to the wrong side.
To Next Page
Loading...