Chapter 1
Introduction
1-1 Product Specifications
Processor
- Supports Intel Celeron/Pentium 4 Socket 478 CPU
- Supports Intel Celeron/Pentium 4 system bus at 400/533MHz
Chipset
- VIA P4M266A + VT8235
Main Memory
- Supports two 184 pin DDR DIMMs up to 2GB
- Supports PC 1600/2100 DDR SDRAM modules
Expansion Slots
- One AGP slot for 1X/2X/4X AGP
- Three 32-Bit PCI slots (v2.2 compatible)
On-board Video System
- Integrated 128-bit ProSavage8 GFX 2D/3D graphics accelerator
- Full frame DVD audio and video playback
- Shared system memory, up to 32MB
Audio Subsystem via AC-Link
- With external high quality AC’97 Codec
- Complete software driver supports for Windows® OS
Ultra DMA 66/100/133 PCI IDE Controller
- Supports two IDE ports up to 4 ATAPI devices
- Supports PIO Mode 4 up to 16.6MBps, Multi Mode 4 up to 66MBps, Multi Word Mode
5 up to 100MBps and Multi Word Mode 6 up to 133MBps with Bus Mastering
- Bus-Mastering software drivers for all common multi-tasking operating systems
USB 2.0/1.0 Host Controller
- Three EHCI USB 2.0 controllers support total six USB 2.0/1.1 ports
- Supports USB 2.0 high-speed device @480 Mb/s transfer rates
On board ITE 8700 Super I/O Functions
- Two UARTs support serial port (COM2 is optional) and IR function (up to 115.2Kbps)
for HPSIR and ASKIR
- One SPP/ECP/EPP parallel port
- One floppy disk drive connector supports up to 2.88MB
Fast Ethernet Controller with MII Interface
- Supports 10/100Mbps fast Ethernet with external VIA VT6103 PHY
Boot-Block Flash ROM
- Award system BIOS supports PnP, APM, DMI, ACPI, & Multi-device booting features.
1-2 Package Contents
This product comes with the following components:
1. Motherboard x 1
2. 40-Pin UDMA-100 IDE Cable x 1
Blue to motherboard, Gray to Master and Black to Slave
3. 34-Pin floppy Disk Drive Cable x 1
4. User’s Guide x 1
5. Driver CD x 1
Chapter 1
To Next Page
Loading...
