Need help?Do you have a question about the Chainway C61 and is the answer not in the manual?
Details the Chainway C61 UHF as a high-performance, single-channel UHF RFID reader module suitable for various environments.
Outlines the C61 module's compatibility with multiple antennas and the provision of development tools like SDK and demos.
Explains how to connect the C61 module to a PC via a development board and different antenna configurations.
Details the pin assignments and descriptions for the C61 UHF module, covering power, ground, GPIO, and UART interfaces.
Provides pin details for a second interface of the C61 UHF module, including BUZZ, UART, USB, and GPIO functions.
Guides users through connecting the device via serial or network mode using the UHFAPP.exe software for parameter configuration.
Explains how to use the 'ReadEPC' page to start/stop tag reading, filter EPC data, and view results like EPC, RSSI, and count.
Details operations on the 'ReadWriteTag' page for reading and writing data to RESERVED, EPC, and USER memory banks of RFID tags.
Describes how to use the 'Kill-Lock' function to lock, permanently lock, or kill UHF tags, requiring passwords for these operations.
Explains how to use the 'UDP-ReceiveEPC' mode for receiving tag data over a network connection, requiring device restart.
Covers reading hardware/firmware versions, temperature, and FCC compliance statements regarding device operation and interference.
General| Brand | Chainway |
|---|---|
| Model | C61 |
| Category | Rfid Systems |
| Language | English |
To Next Page