Challenge Xtreme KD703-T2180LI User Manual

DOCUMENT NO: 1.1
ISSUE: MS
DATR: 2012-02-15
APPROVED: LW
(0197)
EC Declaration of Conformity
Year of 1st Issue .
12
Argos Ltd
489-499 Avebury Boulevard
Saxon Gate West
Milton Keynes
Buckinghamshire
MK9 2NW
We hereby certify that the product stipulated above complies with all the relevant provisions of the following EC new approach directive/s.
This declaration of conformity is issued under the sole responsibility of the manufacturer
Type of Product:
18V Li-ion hammer drill Model Number: KD703-T2180LI
Cat / Article Number: 7114339
Product Description:
Voltage： 18 V
No load speed
1st gear: 0-350/min
2nd gear: 0-1250/min
Clutch position: 16+2
Max. Torque： 25N.m
Chuck capacity: 13mm
Max. Drilling capacity
Wood: 18mm
Steel: 8mm
Masonry: 13mm
Battery capacity: 1.5Ah Li-ion
Charger voltage: 100-240V~50/60Hz, 800mA
Output 23VDC, 1000mA
Charging time 1 hr
Photograph:
Applicable EC Directives
2006/42/EC (MD)
2004/108/EC (EMC)
1999/5/EC (R&TTE)
2006/95/EC (LVD)
2009/105/EC (Pressure)
2000/14/EC Annex , 2005/88/EC
2009/125/EC (ErP)
2009/48/EC (Toys)
L
WA
=86.1dB(A), L
PA
= 72.1dB(A), K=3dB(A)
2009/142/EC (Gas) 89/106/EEC (Construction) / /EC (Others)
Applicable
Harmonized Standards:
Report Date
Verification of conformity
Certificate Notified Body
EN60745-1:2009
EN60745-1/A11:2010
EN60745-2-1: 2010
EN60745-2-2: 2010
2011.5.10 GS TUV
EN 55014-1: 2006+A1
EN 55014-2: 1997+A1+A2
2011.5.23
EMC TUV
EC Type approval certificate number
Issued number: 1.0 Issued on : 2012-5-16
Signed :
Creator: Max Shi Name : Roger Panton-Kent
Position: QA
Position: Head of Quality Assurance

Challenge Xtreme KD703-T2180LI Specifications

General

Brand	Challenge Xtreme
Model	KD703-T2180LI
Category	Drill
Language	English