HELPLINE NO 08454 505299
8
ORIGINAL INSTRUCTIONS
Voltage 18 V
No load speed
1
st
gear 0-350/min
2
nd
gear 0-1250/min
Clutch position 16+2
Max. Torque 25N.m
Chuck capacity 13mm
Max. Drilling capacity
Wood 18mm
Steel 8mm
Battery capacity 1.5Ah Li-ion
Charging time 1 hr
Vibration total values (triax vector sum) determined according to EN 60745:
Drilling into metal
Vibration emission value a
h
= 1.193 m/s
2
Uncertainty K = 1.5m/s²
TECHNICAL DATA
NOISE INFORMATION
VIBRATION INFORMATION
A weighted sound pressure 72.1dB(A)
A weighted sound power 86.1dB(A)
KPA & KWA 3.0dB(A)
Wear ear protection when sound pressure is over 80dB(A)
The declared vibration total value has been measured in accordance with a
standard test method and may be used for comparing one tool with another.
The declared vibration total value may also be used in a preliminary
assessment of exposure.
Masonry 13mm
Charger voltage
Output 23VDC, 1000mA
100-240V~50/60Hz, 800mA
To Next Page
Loading...
