SYMBOLS
To reduce the risk of injury,
user must read instruction
manual
Warning
Double insulation
Wear eye protection
Wear ear protection
Wear dust mask
Waste electrical products
should not be disposed
of with household waste.
Please recycle where facilities
exist. Check with your local
authorities or retailer for
recycling advice.
all safety rules as follows:
1. The laser shall be used and maintained
in accordance with the manufacturer’s
instructions.
2. Never aim the beam at any person or an
object other than the work piece.
3. The laser beam shall not be deliberately
aimed at another person and shall be
prevented from being directed towards
the eye of a person for longer than 0.25
seconds.
4. Always ensure the laser beam is aimed
at a sturdy work piece without reflective
surfaces, e.g wood or rough coated
surfaces are acceptable.
Bright shiny reflective sheet steel
or similar is not suitable for laser
applications as the reflective surface
may direct the laser beam back at the
operator.
5. Do not change the laser device with a
different type. Repairs must be carried
out by the manufacturer or an authorized
agent.
6. CAUTION: Use of controls or
adjustments other than those
specified herein may result in
hazardous radiation exposure.
WARNING:
LASER RADIATION
DO NOT STARE INTO
BEAM
Wave length 650nm
Power max.<1mW
To Next Page
Loading...
Need help?
General
