Need help?Do you have a question about the Challenge Xtreme BMS210MS.1 and is the answer not in the manual?
General| Blade Diameter | 210mm |
|---|---|
| Bore Size | 30mm |
| No Load Speed | 5000rpm |
| Max Bevel Left | 45° |
| Max Mitre Left | 45° |
| Max Mitre Right | 45° |
| No-load speed | 5000 rpm |
Explains how to connect a dust bag to the extraction port for efficient dust collection during operation.
Details the installation of table extension rails to support longer workpieces.
Guides the user on how to attach the support stand for stability during use.
Describes how to fit and adjust the work clamp for securing the workpiece.
Provides instructions on how to securely fix the saw to a firm, level surface.
Instructions on how to safely start the saw motor and unlock the blade guard.
Explains the procedure for making chop cuts, suitable for narrow pieces.
Details the method for performing cross pull cuts on wider pieces of wood.
Instructions for making miter cuts at various angles using the rotary table.
Guides on how to make bevel cuts by tilting the saw head to the desired angle.
Explains how to perform compound cuts requiring both miter and bevel settings.
Details how to adjust the blade depth for partial through cutting or trench cutting.
Instructions on installing batteries and using the laser guide for precision cutting.
Checks and adjustments for ensuring accurate 0° rotary table and 90° tilt settings.
Step-by-step guide for safely removing and refitting the saw blade.
Instructions on how and when to replace worn carbon brushes in pairs.
Guidance on safely locking and transporting the saw.
To Next Page
