Need help?Do you have a question about the Challenge Xtreme BMS210K.1 and is the answer not in the manual?
General| Brand | Challenge Xtreme |
|---|---|
| Model | BMS210K.1 |
| Category | Saw |
| Language | English |
Maintain a clear, well-lit, and dry work area free from hazards.
Always use PPE and disconnect power before servicing or accessory changes.
Secure the workpiece and maintain proper footing and balance.
Keep tools sharp, clean, lubricated, and remove all adjustment tools before use.
Use manufacturer-recommended, sharp, undamaged blades; avoid HSS.
Always wear eye, hearing, and dust protection; use gloves.
Connect dust collector and cut only recommended materials.
Ensure guards are functional and keep the floor area clear.
Cut only specified materials; use correct blade size and quality.
Let blade reach speed, secure workpiece, keep hands clear, avoid freehand cuts.
Ensure guards are operational and keep power cords away from the cutting area.
Aim laser only at workpiece; avoid direct eye contact and prolonged exposure.
Use non-reflective surfaces; do not modify or change the laser device.
Assemble dust extraction port and support stand for proper operation.
Install table extension rails to support longer workpieces.
Steps for releasing the head, positioning material, and making cuts.
Adjusting the rotary table for miter cuts.
Adjust and verify 0°, 90°, and 45° angles using guides and stops.
Correct wiring and fuse usage for plug replacement.
Product warranty for domestic use and procedure for returning faulty items.
To Next Page
