Need help?Do you have a question about the Challenge Xtreme M1Y-DU26-185J-43-1300 and is the answer not in the manual?
General| Brand | Challenge Xtreme |
|---|---|
| Model | M1Y-DU26-185J-43-1300 |
| Category | Saw |
| Language | English |
General advice on maintaining a safe and clean work environment.
Precautions related to mains plug, earthed surfaces, moisture, and leads.
Advice on staying alert, using PPE, and avoiding fatigue or impairment.
Crucial safety measure to prevent hand injuries from the blade.
Warning against reaching under the workpiece to avoid blade contact.
Guidance on setting correct cutting depth for safety and efficiency.
Instruction to secure the workpiece on a stable platform, not by hand.
Recommendation to use guides for ripping for better accuracy and reduced binding.
Emphasizes using blades with matching arbour holes to prevent loss of control.
Explains kickback and provides detailed operator precautions to avoid it.
Advises extra caution for plunge cuts into blind areas to prevent kickback.
Essential check to ensure the lower guard operates freely and closes instantly.
Prohibits operating the saw overhead for safety reasons.
Recommends checking for hidden utility lines to prevent hazards.
States the tool is not designed for stationary use with a saw table.
Warns against using HSS blades as they can break easily.
Advises against sawing ferrous metals due to hot chips igniting dust.
Recommends clamping the workpiece for better security than holding by hand.
Crucial instruction to wait for the blade to stop before placing down the tool.
Emphasizes not using the tool with a damaged cable due to electric shock risk.
Critical warning about the laser beam's potential to cause flash blindness.
General rule for proper laser usage and maintenance as per instructions.
Strict prohibition against aiming the laser beam at people or unintended objects.
Guidance on aiming the laser at suitable surfaces to avoid reflection hazards.
Warning against replacing the laser device with a different type.
Caution regarding using unspecified controls which may lead to hazardous radiation exposure.
Symbol indicating a warning to reduce the risk of injury.
Symbol indicating the tool has double insulation for electrical safety.
Symbol advising the user to wear eye protection.
Symbol advising the user to wear ear protection.
Symbol advising the user to wear a dust mask.
Symbol indicating that waste electrical products should not be disposed of with household waste.
Lists and identifies the On/Off switch as a component.
Lists and identifies the safety lock switch as a component.
Lists and identifies the cutting depth adjustment knob.
Lists and identifies the baseplate component.
Lists and identifies the sawing angle adjustment knob.
Lists and identifies the protractor guide accessory.
Lists and identifies the spindle lock pin.
Lists and identifies the handgrip for user comfort.
Lists and identifies the saw blade safety guard.
Lists and identifies the blade clamping washer.
Lists and identifies the blade guard knob.
Lists and identifies the dust extraction port.
Lists and identifies the saw blade.
Lists and identifies the depth adjustment pivot shaft.
Lists and identifies the parallel guide clamping knob.
Lists and identifies the laser guide feature.
Lists and identifies the laser on/off switch.
Lists and identifies the laser battery compartment.
Warning about variable vibration values and potential hand-arm vibration syndrome.
Instructions on how to adjust the blade cutting depth.
Instructions on how to adjust the mitre cutting angle.
Explanation of the safety lock and power switch operation.
Guidance on using the parallel guide for consistent width cuts.
Steps for starting and operating the circular saw securely.
Ensures the saw is unplugged and protective gloves are worn.
Step-by-step guide on how to remove the saw blade using spindle lock.
Instructions for cleaning parts and aligning blade rotation direction.
Steps for mounting the blade, washer, and securing bolt.
Emphasizes not staring into the beam due to extreme harm.
Instructions for fitting batteries into the laser guide.
Guide on projecting and following the laser line for precision cutting.
Advice on cleaning the laser generator and battery removal when not in use.
Ensures the saw is unplugged before performing maintenance.
Check ventilation slots for dust and foreign matter.
Use a soft damp cloth and mild detergent; avoid harsh cleaners.
Lubricate all moving parts at regular intervals for optimal use.
Details the colour coding for mains lead wires (Blue=Neutral, Brown=Live).
Step-by-step guide on connecting wires to the correct terminals (N, L).
Specifies the need for a 13 AMP fuse for 13 AMP plugs.
Procedure for replacing a damaged supply cord by a qualified person.
To Next Page
