COMPONENT LIST
1. On/Off switch
2. Safety lock switch
3. Cutting depth clamping knob
4. Baseplate
5. Sawing angle clamping knob
6. Protractor Guide
7. Spindle lock pin
8. Handgrip
9. Saw blade safety guard
10. Blade clamping washer
11. Blade guard knob
12. Dust Extraction port
13. Saw blade
14. Depth adjustment pivot shaft
15. Parallel guide clamping knob
16. Laser
17. On/off switch for laser
18. Laser battery compartment
CHECK THE DELIVERY PARTS
Carefully remove the machine from its packaging and check
as the following parts are complete:
-- 1300W circular saw with laser
-- 1 x 24T saw blade pre-assembled on the machine
-- 1 x dust port
-- 1 x Parallel guide
-- 2 x 1.5V AAA baterries for the laser
-- 1 x hex key
-- operating instructions
If any parts are missing or damaged, please contact your
dealer.
To Next Page
Loading...
Need help?
General
