4
z Support the work properly.
z Never reach over the blade to remove waste or off cuts.
z Do not attempt to free a jammed blade before first switching off the
machine.
z If you are interrupted when operating the saw, complete the process and
switch off before looking up.
z Periodically check that all nuts, bolts and other fixings are properly
tightened.
z Do not store material of equipment above a machine in such a way that
they could fall into it.
z Always hold the saw on parts that are insulated. If you accidentally cut into
hidden wiring or the saw’s own cable, the metal parts of the saw will
become ‘live’.
z Check the voltage on mains matches that of rating plate before plugging in
the tool.
z Do not secure the jigsaw upside down in a vice or work bench and use it as
a saw bench. This can lead to serious injury.
z When using the jigsaw, use safety equipment including safety goggles or
shield, earmuffs, dust mask and protective clothing including safety gloves.
Always wear eye
protection with this
tool.
Always wear ear
protection with this
tool.
5
Component List:
1. Locking button 7. Roller support
2. Trigger switch 8. Pendulum setting stick
3. Variable speed switch 9. Bevel setting screw
4. Set screw 10. Hex wrench
5. Safety guard 11. Dust extraction adaptor
6. Base plate
Accessories:
1PC metal cutting blade, 1PC plastic cutting blade, 2PCs wood cutting blade
1PC hex wrench, 1PC dust extraction adaptor, 1PC blow moulded case
Technical specifications:
Voltage: 230V~ 50Hz
Wattage: 710W
No-load speed: 500-3000/min
Cutting depth 80mm(wood)
10mm(steel)
Rated operating time: On for 30 mins / Off for 30 mins
Insulation Class: Double Insulation
Vibrations: 2.10m/s
2
Noise emission: Lp 81 dB(A);
Lw 92 dB(A)
Weight: 2.14 kgs
To Next Page
Loading...
