Challenge XSZ40E - Assembly; Preparing to assemble the lawnmower; Step 1 - Assemble the lower handle

5
Customer Helpline 01904 727503
www.gardenservicecentre.co.uk
WARNING!
- Always take care when removing the packaging to prevent damage to you or to the lawnmower.
- This item requires a two person lift to remove from the packaging. Make sure that you have
sufcient space to put the lawn mower down. Keep your feet apart so that you have a stable
position, bend at the knees and keep your back straight.
- Always recycle the packaging in accordance with local recycling schemes.
Remove the packaging from the handle.
Insert the lower handle into the deck as shown and on each side and x it with a self - tapping
screw.
NOTE! Press rmly down until the handle bottoms out in the holes or the cables will be too tight
and the handle will not be secure.
Preparing to assemble the lawnmower
Assembly
Step 1 - Assemble the lower handle