explosive. Repair such components in a well
ventilated area away from open flames or sparks.
Inspect all lines and hoses for wear or for
deterioration and replace if necessary.
Route hoses correctly. Lines and hoses must have
sufficient support and secure clamps. Tighten all
connections to recommended torque.
1.1.29 Fire extinguisher
Make sure that a fire extinguisher is available and
be familiar with the operation. Inspect and service
the fire extinguisher regularly. Obey the
recommendations on the instruction plate.
An optional (1) mounting bracket can be installed
on the right front frame rail.
The bracket is designed to hold a 4.5 kg (10
lb)extinguisher.
Do not weld a bracket on the cab ROPS frame to
install the fire extinguisher.
Do not drill holes in the cab ROPS frame to mount
the fire extinguisher.
Make sure all the clamps , the guards, and the
heat shields are installed correctly to prevent
vibration, rubbing, and excessive heat during the
machine operation.
GUID-570FBBC7-80BC-4181-8CAC-285084FC4CD3-high.jpg [High]
Fig. 16
1.1.30 Public road transportation
Always walk around and visually examine the machine before moving on a public road. As a warning to
others in the area, honk the horn two times before starting engine. Do a check for damage and/or
defective components that can make a dangerous condition. Make sure all machine systems operate
correctly including (but not limited to):
•
front road lamps
• tail and brake lamps
• amber hazard lights
• parking brake
• horn
• windshield wiper and washer
• rear view mirrors
• etc.
Repair or replace a component not in correct operating order.
Do not drive at a speed causing machine to lose control.
Obey all traffic rules. Operate the machine with hazard lights on, unless prevented by law. The operation of
work lamps while driving on public roads is prohibited. Use of road lamps while moving on public roads is
the operator's responsibility.
NOTE:
When the Speed Indication Symbol (SIS) is installed in the rear window, be sure to close the rear window
when transporting the machine on the road.
GUID-BB2F4A8C-9E74-4ED4-B9E5-510F3EBC9A63 [V2]
GUID-83333B29-DD08-4E83-9040-BB07F2BF96DE [V3]
1. Safety
24 Articulated Tractor
582773D1C
To Next Page
Loading...
