Safety
1-6 639782-1
FIG. 8:
5. Danger - Chemical and Confined space hazard.
Safety sign is located on product tank cover and on
eductor lid.
Do not allow chemical solution to come in contact
with skin or eyes. Some chemicals can be
absorbed into body through skin. Wear rubber
gloves, safety glasses and protective clothing at all
times. Cover on tank must be open while servicing
tank. Ventilate tank before and during servicing.
Because residue of chemicals can spread toxic
gases or vapor. Do not ingest chemical -
Chemicals can be toxic. Read and follow
manufacturers instructions. Do not breathe vapor,
wear proper respirator when working around
chemicals.
FIG. 9:
6. Retorque wheel nut with 630 Nm - See the
Lubrication & Maintenance section.
Decal is located on every rim.
Follow the instructions given in the Lubrication &
Maintenance section.
FIG. 10:
7. Check oil level wheel motor - Read the operator’s
manual, see the Lubrication & Maintenance
section.
Maintenance sign is located on each wheel motor.
FIG. 11:
8. Use protective gear when handling chemicals and
operating the machine.
Decals are located near the eductor and operator
control station.
a. Goggels;
b. Gloves;
c. Safety boots;
d. Clothing;
e. Breathing protection;
f. Hearing protection.
FIG. 8
FIG. 9
FIG. 10
FIG. 11
To Next Page
Loading...
Need help?
General
