Safety
1-26 639782-1
To increase visibility, use lights and devices provided.
Amber flashing warning lights and/or turn signals are
recommended whenever driving on public roads unless
prohibited by law. Keep all lights and markers clean and
in proper working order.
Replace any missing or damaged components
immediately.
STOPPING AND PARKING
Machine overturns, collisions, runaways and crushing
accidents can occur when an operator ignores safety
procedures.
Signal before stopping, turning or slowing down on
public roads, or anywhere it will cause a potential
hazard.
Pull over to side of road before stopping.
Be extremely careful when stopping on slippery
surfaces and with heavy loads.
Always engage parking brake when machine is
stopped. Parking brake is automatically applied after 5
seconds when the machine has stopped.
Remove key to prevent any unauthorized personnel
from operating machine.
EXHAUST FUMES
FIG. 76: Always work in a properly ventilated area.
Engine exhaust fumes can cause sickness or death. If
it is necessary to run engine in an enclosed area, use
proper equipment to safely remove exhaust fumes from
area.
Always open doors and get outside air into area.
SYSTEM BOOM OPERATION
FIG. 77: Make sure no personnel or objects are in path
of booms before retracting or extending.
Be aware of boom location at all times.
Retract and lock booms before driving on public roads.
FIG. 76
FIG. 77
To Next Page
Loading...
Need help?
General
