Safety
1-32 639782-1
FIG. 91: Hazard - Danger poisonous substances.
m
WARNING: Never put used or
contaminated personal protective
equipment with new or clean personal
protective equipment in one storage
compartment.
If hazardous chemicals come in contact with body,
wash immediately according to chemical
manufacturer's recommendations.
Select a proper area to fill, flush, calibrate and
decontaminate machine. Select an area where
hazardous chemicals will not drift or run off to
contaminate people, animals, vegetation, water supply
etc.
Never place nozzles, tips or other parts to lips to blow
out trash or debris. Have spare tips available for
replacement.
FIG. 92: Clean machine of hazardous chemicals after
use. Hazardous chemical residue can build up on
inside and outside of machine.
m
WARNING: Direct exposure to hazardous
chemicals can cause serious injury or
death. Potentially hazardous chemicals
used with AGCO equipment include such
items as fuel, lubricants, coolants,
hydraulic fluid, paints and adhesives.
FIG. 93: The Safety Data Sheet (SDS) provides
specific details on hazardous chemical products,
physical and health hazards, safety procedures and
emergecy response techniques.
Check MSDS before using any hazardous chemical.
Know risks and how to perform project safely. Follow
procedures and equipment recommendations.
(See chemical manufacturer for SDS's on chemical
products used with your AGCO equipment).
FIG. 91
FIG. 92
FIG. 93
To Next Page
Loading...
Need help?
General
