Champ CW-898A - Problem Troubleshooting; Troubleshooting Hot Water Issues; Troubleshooting Cold Water Issues; Troubleshooting Sparkling Water Issues

PROBLEM SHOOT
erate LUI
Hot water is not hot
est] Mime Core
1. The hot power switch
is off.
Stel
Turn the hot power switch on.
2. Hot temperature Call for service to reset the protection
protection is enabled | button on the hot tank.
due to dry-heat.
3. Problem with PCB or Please contact service people.
thermostat.
No hot water 1. No water from mains | Check inlet water supply.
water supply.
2. Inlet water pressure is | Check inlet water pressure from pre-
too low. filtration system or water supply.
3. Water is not being Please press hot water button to fill
filling into hot tank. water into hot tank until water comes
out.
Cold water is no cold 1. The cold power switch | Turn the cold power switch on.
at back is off
2. Chilling time is not Please wait 40 minutes for water
enough. chilling.
3. Refrigerant leaks. Contact service people.
No cold water 1. No water from mains | Check inlet water supply.
water supply.
2. Cold water is being Contact the service people.
filling into cold tank.
3. Inlet water pressure is | Check inlet water pressure from pre-
too low. filtration system or water supply.
4. Water in cold water Unplug the power cord then wait for 4
tank got frozen. — 8 hours. Internal pipe may be
broken please contact service people
as well.
No sparkling water 1. COz runs out. Replace a new CO: Cylinder.
2. The soda power Turn the soda power switch on.
switch at back is off.
3. Wateris unable tobe | Contact the service people.
filled to sparkling
water tank.
12