Champ CW-898A - Soda Water Operation

SODA OPERATION METHOD
1.Press ambient or cold water (if there is no ambient water option) button
to dispense some water to flush filters. This is important to ensure
drinking water quality.
2. Turn on the soda power switch at back, then press any button to
allow mains water filling into soda tank.
3.Please push the soda water button to drain out the primary soda
water in the tank. The newly produced soda water is now ready to
drink.
For secure reason, the dispensing is limited within 60 seconds. If you
need more water please touch button again.
Cold Water Hot Water Sparkling Water Ambient Water
>
power switch