Chapter 2 List of accessories and installation of the batteries
2.1 List of accessories
When you receive the machine, check whether its packing is damaged. Make a
declaration to the carrier immediately if the packing is obviously damaged.
Check whether the following items are presented. If one or more item(s)
is(are) lost, contact the distributor or the original manufacturer immediately:
1. 6V battery * 6
2. 36 V charger
3. Battery connecting cable
4. Water absorbent strip
5. Brush plate * 2
6. Needle plate * 2
7. Other accessories that you have purchased.
Before unpacking the machine, remove the shipping fasteners and ropes
securing the machine to the pallet, and then carefully remove the machine
from the pallet with the assistance of others.
If a loading pad is not used, do NOT push the machine directly to avoid
damage to it.
Remove the machine from the pallet before installing the batteries so as to
avoid damage to the machine.
2.2 Installation of the batteries
ALERT!
Hydrogen will be generated during the charging process. As a result, the charging
room must be well ventilated and away from sparks and open fire, or severe
accidents may take place.
FOR YOUR OWN SAFETY
Please wear protective devices and avoid direct contact with the acid liquid of the
batteries.
Follow the instructions below to install the batteries:
1. Park the machine on a flat land and take out the
starting key.
2. Raise the sewage tank.
To Next Page
Loading...