(2)Cleaning the oil filter
Loosen off the bolt and then pull out the oil filter
(3)Replacing the air filter element.
A.Paper element
Replace the air filter element after every
200 hours of operation.
Note:
A clogged element hinders the flow of air
to the combustion chamber. This makes starting
difficult, reduces engine output, smokes black,
increases lube oil and fuel consumption. Never
run the engine without the element or with a
defective element.
B.oil bath element
Check the oil lever before running the
engine. Fill the lube oil to the upper mark. If the
oil is dirty, replace it.Clean the element with
kerosene frequently, then immerse it in lube oil,
push out of the surplus lube oil.
(4)Cleaning and replacing the fuel filter.
The fuel filter also has to be cleaned
regularly to insure maximum engine output.
First drain off the fuel from the fuel tank, then
loosen two nuts of the fuel cock and pull out the
fuel filter from the fuel tank.
(5)Tightening cylinder head bolts
Tightening the cylinder head bolts requires a
special tool. Don’t try it yourself. Please consult
your nearest Changchai dealer.
(6)Adjusting the injector and the injection pump,
replacing the piston ring of the valve seat.
All these require special tools and skills,
please consult your nearest Changchai dealer.
To Next Page
Loading...