To Next PageTo Next PageWhat to do if Char-Broil Grill burner won't light with ignitor?
If the burner won't light using the ignitor, ensure the regulator control valve is correctly positioned inside the burner tube. Check for obstructions like spider webs in the burner tube; if present, clean them. Verify that the LP cylinder is not empty. Also, remove the LP cylinder and clean the threads on both the cylinder and the regulator control valve.
What causes electrical issues with the Char-Broil Grill2Go ignitor?
Electrical issues with the ignitor can occur if the electrode is cracked or broken, causing sparks at the crack; if this happens, replace the electrode(s). Also, wipe the electrode and burner dry if they are wet. Clean any cooking residue from the wire or electrode using rubbing alcohol and a clean swab. Ensure wires are securely connected; reconnect if loose, or replace the electrode/wire assembly. Replace the ignitor wire/electrode assembly if wires are shorting (sparking) between the ignitor and electrode.
What to do if the Char-Broil Grill2Go Grill regulator control valve knob does NOT stay down in ON positions?
If the regulator control valve knob does not stay down in the ON positions, replace the regulator control valve.
How to fix Char-Broil Grill2Go regulator control valve knob if it does NOT pop up in the OFF position?
If the regulator control valve knob does not pop up in the OFF position, replace the regulator control valve.
General| Fuel Type | Propane |
|---|---|
| Burners | 1 |
| Grate Material | Porcelain-coated cast iron |
| Burner Material | Stainless Steel |
| Portability | Yes |
| Cooking Surface Area | 200 square inches |
| Ignition Type | Push-Button Ignition |
| Material | Aluminum |
| Weight | 20 pounds |
| Type | Portable |
Key safety alerts including cautions and warnings for safe operation.
Explains the meaning of DANGER, WARNING, and CAUTION symbols used throughout the manual.
Essential safety measures and compliance requirements for grill installation.
Information on LP gas properties, cylinder handling, and safety precautions.
Step-by-step guide for leak testing the gas connections before operation.
Step-by-step guide for lighting the grill and safely turning it off.
Guidelines for storing the grill, ensuring food safety, and checking food temperatures.
Guide to checking burner flames, cleaning the burner assembly, and regulator removal.
Warning about spiders and insects blocking gas flow and causing flashbacks, with cleaning solutions.
Actions to take for gas leaks or fires, and possible causes and solutions.
Solutions for burner ignition failures, obstruction, and gas flow problems.
Addressing problems like low flame, flames blowing out, flare-ups, and flashbacks.
