OM5050E.2 ™ & © Char-Griller / A&J Mfg. 10
Step 1
Attach the LEFT LEGS & RIGHT LEGS to the BASE using four (4) ½” BOLTS and four
(4) ¼” LOCK WASHERS as shown. When you install the LEFT LEG & RIGHT LEG,
please make sure that the holes at the top of the LEGS are facing out. Please note
that the wheel legs have inside and outside sides. The axel will not fit through the
legs if the outside of the leg is not facing out
Step 2
Attach the LEG CROSSBAR to the frame as shown making sure that the holes on the
CROSSBAR are facing inward. See below.
To Next Page
