EasyManua.ls Logo

Chard 12 - Important Safeguards

Default Icon
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 2 -
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS AND SAVE FOR FUTURE REFERENCE.
When using electrical appliances, basic safety precautions must
always be followed, including the following:
1. Before rst use, check that the voltage of the wall outlet corresponds to
the one shown on the appliance rating plate located on the underside of
the motor housing body.
2. Before assembling, removing parts or cleaning, make sure the appliance is
unplugged from the wall outlet.
3. Make sure all appliance parts are correctly assembled and the locking knob has
been securely placed before you switch on the appliance.
4. Switch off the appliance and unplug before changing parts or accessories to
ensure that all moving parts are no longer operating or in motion.
5. To avoid damage to the appliance such as an abnormal noise, vibration or an
electric spark inside the appliance, please wait at least six seconds before
switching the appliance from the ‘ON’ function to the ‘REVERSE’ function.
6. The appliance blade is very sharp, please store the appliance properly, out of
the reach of children.
7. DO NOT grind hard foods or bones. Damage to appliance may occur.
8. DO NOT grind ginger and other materials with hard ber. Damage to appliance
may occur.
9. This appliance will power off automatically if the motor is overheating. Once
the temperature drops, the appliance will resume operation. If the appliance
overheats and stops running, please set the power switch to the “OFF” position,
and wait until the appliance has cooled down before operating again. DO NOT
operate this appliance for more than one hour at a time
.
10. This appliance is tted with a safety feature which safeguards against
excessive use. In the case of excessive use, the appliance will automatically
activate the overload protection and switch itself off. If this occurs, please set
the power switch to the “OFF” position, unplug the appliance and allow it to
cool down for 30 minutes. Then press the “RESET” button on the bottom of
the motor housing. DO NOT operate this appliance for more than one hour at
a time.
11. Before plugging the cord into a wall outlet, or disconnecting, make sure the
control is OFF, unplug from the outlet when not in use or before cleaning.

Related product manuals