Chariot CABRIOLET - GETTING STARTED; UNPACKING YOUR CARRIER; INCLUDED COMPONENTS

To Next Page

To Previous Page

C www.chariotcarriers.com 51100456

GETTING STARTED

4.0 unPackInG your carrIer

A. Opentheboxapsandremovethestaples.

B. Remove the handlebar from inside the box.

C. Lay the box on its side on a clean, sturdy surface.

D. Slide the carrier and wheels out of the box.

(See image 1)

E. Remove and discard all packaging materials

including the shipping box, the plastic bag, packing

foam, silica desiccant packs, product tags and

wheel packing discs.

4.1 Included comPonents

Verify that your carrier was packaged with the

following items:

• CabrioletChassis

• Two-in-OneCover(onChassis)

• Handlebar

• Two20inchWheels

• ParkingBrake

• Owner'sManual

NOTICE

This child carrier is not packaged with any

CTS™ conversion kits. These kits are sold and

packaged separately.

NOTICE

Store your carrier and its components in a safe

dry place so that when they are needed, they

are in the best possible condition.

GETTING STARTED

Cabriolet_Manual_English_100212.indd 8 12-10-31 2:35 PM