CHASE Paymentech VeriFone Vx Series - Navigating Your Terminal; Initiating Transactions; Accessing Setup and Reports

8
BEGIN A SALE
To begin a sale transaction, press [F2] to select Sale from the
idle screen. Your terminal will guide you through the process.
BEGIN OTHER TRANSACTIONS
Use the [Arrow] key at the main menu or idle prompt to
navigate to the transaction type you wish to perform. Scroll
through the menu and press the corresponding [F] key when
your desired transaction appears on the terminal display.
REPRINT A RECEIPT
The Reprint function is accessible through the main
menu. Press [Arrow] to scroll, and select Reprint.
You will be prompted to select last receipt, or enter
criteria to search for another receipt to reprint.
ACCESS CLERK/SERVER SETUP
At the main menu, press [OK] to access the Configuration menu.
Then, navigate to the Clerk Setup or Server Setup option.
ACCESS REPORTS
Press [Reports] below the display to access the
Reports menu. Scroll to the desired report or report
category, then press the corresponding [F] key and
follow the prompts to view or print your report.
ACCESS TIP FUNCTIONS
Press [Tip Adjust] below the display to access the Tip
menu. Scroll to the desired function, then press the
corresponding [F] key and follow the prompts.
EDIT AUTO SHIFT TIMES
If you are in auto shift mode, use this procedure to edit the shift
start and end times. Press [1] at idle to access the Shift menu.
MANUAL SHIFT CLOSE
If you are in manual shift mode, use this procedure
to close the current shift and start a new shift.
Press [1] at idle to access the Shift menu.
DOWNLOAD UPDATES
Your terminal will automatically check for updates to its
software every 60 days (default). If an update is available,
the terminal will schedule a time to perform the automatic
download. The terminal will not proceed with the download
at the scheduled time if any transactions are left unsettled.
Navigating
Your
Terminal
Refer to this section
to find and begin the
transaction or function
you wish to use.