112
IOLAN
+
- User and Administration Guide
LOCK
Syntax:
lock
Description: This function allows the user to lock his terminal
using a specific password. IOLAN+ prompts the
user for a password and a confirmation. This
function can not be used unless the Lock enable
flag is set (via
set port
command).
LOGOUT
Syntax:
logout
Description: This function causes the user to exit IOLAN+.
The unit closes down any sessions and resets
the port. Same as
exit
.
PROV
Syntax:
prov
Description: This function displays the network status of each
IP provider and is used for troubleshooting.
REBOOT
Syntax:
reboot
Description: This function reboots the terminal server.
Admin level is required.
RESUME
Syntax:
resume <session number>
Description: This allows user to resume an established
connection if there are multiple sessions going.
RLOGIN
Syntax:
rlogin [host] [port]
Description:
This function allows the user to make an rlogin
connection to the specified host machine. If the
port number is not specified then it defaults to 513.
SAVE
Syntax:
save config
To Next Page
Loading...