Need help?Do you have a question about the Chatillon DFS II-R-ND and is the answer not in the manual?
General| Brand | Chatillon |
|---|---|
| Model | DFS II-R-ND |
| Category | Measuring Instruments |
| Language | English |
Essential safety practices for operation.
Turn the gauge on and off using the power key.
Battery charging procedures and indicators.
Standard tensile/compressive load display.
Tension Peak (T-PK) and Compression Peak (C-PK).
Safeguards against excess force.
Secure unit setup and configuration.
Store measurement results in gauge memory.
View pass/fail status of measurements.
Connect via RS232, USB, Bluetooth, Mitutoyo.
Set limits by upper and lower values.
Set limits by nominal value and bandwidth.
Enable feature and choose range or nominal value method.
Configure range or nominal value parameters.
Set high and low load thresholds.
Define the upper load threshold.
Define the lower load threshold.
Configure RS232, USB, Bluetooth communication.
Guidelines for choosing the appropriate sensor.
Requirements for DFS II-R-ND sensor connection.
Consequences of incorrect sensor hookup.
Features and compatibility of the software.
Capture the break load of a sample.
Define trigger value for break detection.
Define percentage drop for break calculation.
Accuracy, rates, capacity, memory by model.
To Next Page
