Chatillon DFS II-R-ND - Saving Break Test Results

64 DF II Series User Manual
When the F2 “XmitAll” key is selected, the gauge
will transmit all information “Saved” in the gauge
memory for the %Bk mode. The following informa-
tion is transmitted:
n Result Number (1- 10)
n Break Load with or without Units
n Maximum Load with or without Units
n Peak Load with or without Units
n % Drop Value
n Break Point Value
n Pass or Fail Result
n Pass/Fail High Limit
n Pass/Fail Low Limit
Information will be transmitted in a Row format.
Each Row will represent the Result Number.
Column headers will be transmitted for each result
value listed above.
Result Break Load Max Load Peak Load %Drop BkPt P/F P/F High P/F Low
1 25.00 lbf 50.00 lbf 53.48 lbf 50% 15 lbf Pass 30.00 lbf 20.00 lbf
Sample Row Report