95
INSTALLATION/REMOVAL
Intelect® Advanced Therapy System
INSTALLATION- CHANNEL 3/4 ELECTROTHERAPY MODULE
General Information
The Intelect Advanced Therapy System Channel 3/4 Electrotherapy Module is a two channel electrotherapy module intended to upgrade
the Intelect Advanced Therapy System Two Channel Electrotherapy and Two Channel Combination Therapy Systems to Four Channel
Electrotherapy or Combination Therapy Systems. This module is designed for use with the Intelect Advanced Therapy Systems only.
• Read, understand, and follow all precautionary instructions found on pages 2 through 6, and throughout this manual as indicated,
before performing any installation or removal of optional modules and accessories.
• Perform all optional module and accessory installation and removal procedures as described in this manual. Failure to follow these
explicit instructions could cause permanent damage to internal components of the equipment and render the system unsafe for
patient therapy.
• Understand all symbols and their definitions before operating or performing any installation or removal of optional modules and
accessories. The Symbol Definitions are on pages 2 and 13 of this manual.
• Follow all safety precautions before, during, and after any treatment.
• Read, understand and follow the indications, contraindications, and adverse effects of the modalities associated with this system found
on pages 7 through 9 of this manual before administering any treatment.
• Keep informed of appropriate indications and contraindications for the use of all modalities utilized with this Therapy System.
• This system, optional modules, and accessories are to be used and sold only under the prescription and supervision of a physician or
licensed practitioner.
Disconnect the system from the power source (outlet or remove
battery module if installed) before attempting any maintenance,
installation, removal, or replacement procedures to prevent electrical
shock and possible damage to system.
To Next Page
Loading...
