Chauvet DJ ILS Command - Before You Begin; Product Information & Setup Guidance; Legal & Administrative Information

3
EN
QUICK REFERENCE GUIDE
ILS Command QRG Rev. 1
<MASTER
STROBE>
Button Press to trigger/toggle all effects to strobe
<BLINDER> Button Press to trigger/toggle blinder effect (all effects white at full output)
<FREEZE> Button Press to toggle freeze (hold all output at the current setting)
<BLACK OUT> Button Press to toggle black out
<Red>ButtonPress to toggle all output to red
<Amber>Button
Press to toggle all output to amber and to select a parameter when programming
follow spot mode
<Yellow>ButtonPress to toggle all output to yellow
<Green>Button
Press to toggle all output to green and to select a parameter when programming
follow spot mode
<Blue>ButtonPress to toggle all output to blue
<Cyan>Button
Press to toggle all output to cyan and to select a parameter when programming
follow spot mode
<Magenta>ButtonPress to toggle all output to magenta
<White>Button
Press to toggle all output to white and to select a parameter when programming
follow spot mode
<UV>ButtonPress to toggle all output to ultraviolet
<MOVING HEAD> Button
Press to activate moving heads, to set moving heads to default, and to
deactivate moving heads
<PAR> Button Press to activate pars, to set pars to default, and to deactivate pars
<LASER> Button Press to activate laser control, to set lasers to default, and to deactivate lasers
<STROBE EFFECT> Button Press to activate strobes, to set strobes to default, and to deactivate strobes
<DERBY> Button
Press to activate derbies/kintas, to set derbies/kintas to default, and to deactivate
derbies/kintas
<COLOR> Button Press to cycle through colors for the associated effect
<MOVEMENT> Button Press to cycle through movement macros for moving heads
<SPEED> Button Press to cycle through speeds for the associated effect
<GOBO> Button Press to cycle through gobo effects for moving heads
<MACRO> Button Press to activate and cycle through macros for pars
<PATTERN|SPEED> Button Press to cycle through patterns/speeds for lasers
<PATTERN> Button Press to cycle through patterns for strobes
<PRESET 1–6> Button
Press and hold to save settings to the preset slot, then use the <X> encoder to
name the preset and assign a button color
Press to activate and deactivate the preset
Label/Color Type Function