Chauvet Freedom Par - User Manual

Questions and Answers

K
kathleenmeyersJul 26, 2025
What to do if Chauvet Lighting Equipment does not power up?
- M
  Morgan FisherJul 26, 2025
  If your Chauvet Lighting Equipment isn't powering on, there are several potential causes. First, check the power outlet to ensure it's working, and try a different outlet. A loose or damaged power cord could also be the culprit, so inspect it carefully. Another common issue is a blown fuse; replace it with a new one of the same type and rating. If none of these steps work, there may be an internal problem, and the product may need professional repair.
T
Theresa PayneAug 2, 2025
Why does the circuit breaker keep blowing on my Chauvet Freedom Par?
- A
  Andrew BurtonAug 2, 2025
  A circuit breaker might blow due to an excessive load on the circuit. Ensure the total load doesn't exceed 80% of the breaker's nominal current. Alternatively, a short circuit along the power lines could be the cause. In this case, you should carefully check the power lines and power cords for any damage.
A
Austin MillerAug 10, 2025
What to do if Chauvet Freedom Par Lighting Equipment does not respond to DMX?
- L
  Lisa SingletonAug 10, 2025
  If your Chauvet Lighting Equipment isn't responding to DMX, several factors could be at play. First, verify that the starting address on the product is correct and that you're using the right fader(s) on the controller. Also, ensure the DMX personality setting on the product is correct, and assign the faders accordingly. A wrong polarity setting on the DMX controller can also cause this issue; try changing the signal polarity. Check the DMX cable for any looseness or damage before the unit. If these steps don't resolve the problem, the unit may have an internal problem and require repair.
C
Cameron HendersonAug 17, 2025
How to fix intermittent DMX problems with Chauvet Lighting Equipment?
- J
  Jordan GarciaAug 17, 2025
  Intermittent DMX issues with Chauvet Lighting Equipment can stem from several sources. Start by ensuring that you are using true DMX cables, as standard signal cables are often incompatible. Interference from AC or radio signals can also cause problems, so keep DMX cables away from AC wires or radio equipment. If the DMX cable is too long, consider installing an optically coupled DMX amplifier right before the product experiencing issues. If you have a large number of products connected, install an optically coupled DMX amplifier after unit #32. Finally, ensure a terminator is properly connected.

Summary

3. Setup

AC Power

Instructions for connecting the product to AC power and electrical safety.

Battery Charging and Maintenance

Guidelines for charging, maintaining, and understanding the battery life indicator.

Fuse Replacement

Step-by-step guide for replacing the product's fuse.

Power Linking

Explains how to link multiple units for power distribution.

Mounting

Procedures and considerations for physically mounting the product.

Rigging

Safety and practical advice for rigging the product.

4. Operation

Control Panel Operation

Menu Map Overview

DMX Configuration

Steps for setting up DMX addressing and personalities.

DMX Channel Assignments

Standalone Configuration

How to configure and operate the product in standalone modes.

IRC Operation

D-Fi Wireless Sync

Guides for setting up wireless D-Fi™ syncing in various modes.

Master;Slave Modes

5. Technical Information

Product Maintenance and Cleaning

Chauvet Freedom Par Specifications

General

LED Life Expectancy	50, 000 hours
Battery Type	Lithium-Ion
Wireless Control	Yes
Wireless DMX	Yes
Size	5.8 x 5.4 x 7.2 in (147 x 138 x 184 mm)
Control Modes	DMX, Standalone
Battery Life	8 hours (full on); up to 20 hours (single color)