What to do if Chauvet LED PAR 38-18B Lighting Equipment does not power up?
If your Chauvet Lighting Equipment isn't powering on, there are a couple of things you can check: first, ensure that the unit is receiving power from the mains. Second, verify that the power cord is securely connected.
Why does the breaker/fuse keep blowing on my Chauvet LED PAR 38-18B Lighting Equipment?
If the breaker or fuse continues to blow, it could be due to excessive load on the circuit. Check the total load placed on the electrical circuit. Alternatively, there might be a short circuit in the electrical wiring, either internal or external, so inspect the wiring for any shorts.
How to fix Chauvet Lighting Equipment not responding to DMX?
If your Chauvet Lighting Equipment isn't responding to DMX signals, consider the following: * Verify the DMX addressing by checking the Control Panel and unit addressing. * Inspect the DMX cables for any damage. * Check the polarity switch settings on the controller to ensure they are correct. * Ensure all DMX cable connections are secure. * If the issue persists, the DMX input or Main PCB may be faulty and need replacement.
What to do if Chauvet LED PAR 38-18B Lighting Equipment has loss of signal?
If you're experiencing signal loss with your Chauvet Lighting Equipment, here are a few things to investigate: * Make sure you are using only DMX compatible cables. * If you suspect bouncing signals, install a terminator. * For long cable runs or low-level signals, install an amplifier after a fixture with a strong signal. * If you have many fixtures, install an optically coupled DMX splitter after unit #32. * Keep DMX cables separated from power cables or black lights to avoid interference.
Power| auto-ranging power supply | 100~240 VAC, 50/60 Hz |
|---|---|
| power consumption at 120 VAC | 22 W (0.4 A) max |
| power consumption at 230 VAC | 22 W (0.2 A) max |
| fuse | T 1 A, 250 V |
Light Source| led power | 1 W |
|---|---|
| led current | 350 mA |
| led lifespan | 50, 000 hrs |
Photo Optic| luminance at 1 m | 4, 000 lux |
|---|---|
| beam angle | 16° |
| field angle | 32° |
Operating Environment| maximum ambient temperature | 104° F |
|---|
Weight and Dimensions| length | 9.3 in |
|---|---|
| width | 8.8 in |
| height | 11.4 in |
| weight | 3.7 lbs |
To Next Page