Chauvet SCAN LED - User Manual

3000 N 29
th
Ct, Hollywood, FL 33020 U.S.A.
(800) 762-1084 – (954) 929-1115
FAX (954) 929-5560
www.chauvetlighting.com
User Manual
Snapshot
Use on Dimmer
Outdoor Use
Sound Activated
DMX 512
Master/Slave
Autoswitching
Power Supply
Replaceable Fuse
User Serviceable
Duty Cycle

Summary

BEFORE YOU BEGIN

What is included

Lists all items included in the product package.

Unpacking Instructions

Provides guidance on carefully unpacking the fixture and checking for damage.

Symbols

Explains the meaning of warning and informational symbols used in the manual.

AC Power

Details power requirements, voltage compatibility, and connection guidelines.

Safety Instructions

Crucial safety precautions for installation, operation, and maintenance to prevent hazards.

INTRODUCTION

Features

Lists the primary technical features and specifications of the lighting fixture.

Additional Features

Highlights extra features and capabilities of the fixture, such as power output and program modes.

Options

Mentions optional accessories available for use with the fixture.

Product Overview

SETUP

Light Source

Describes the fixture's light source as a high luminosity LED, pre-installed and requiring no setup.

Manual Focusing

Provides step-by-step instructions for adjusting the focus of the light beam.

Fuse Replacement

Details the procedure for replacing a blown fuse, emphasizing safety precautions.

Fixture Linking

Explains how to connect multiple fixtures using DMX or Master/Slave configurations.

DMX Data Cable

Details specifications and requirements for DMX data cables.

Cable Connectors

Illustrates DMX connector configuration and pin assignments.

Setting up a DMX Serial Data Link

Provides instructions for establishing a DMX serial data link between fixtures.

Master;Slave Fixture Linking

Explains how to link fixtures in Master/Slave mode for synchronized operation.

Mounting

Orientation

Describes permissible mounting positions for the fixture.

Rigging

Details safe rigging practices, including clamp usage and location considerations.

OPERATING INSTRUCTIONS

Operating Modes

Outlines the different operating modes: Stand-alone, Master/Slave, and DMX mode.

Using DMX Mode

Details how to connect and configure the fixture for DMX control.

Setting the Starting Address

Explains how to set the DMX starting address using DIP switches with examples.

CA-9 Easy Controller (Optional)

Contact Us

APPENDIX

DMX Primer

Explains the DMX mode, channels, and addressing for controller compatibility.

General Maintenance

Returns Procedure

Claims

Technical Specifications

Chauvet SCAN LED Specifications

Power

voltage range	100-240 VAC
frequency	50/60 Hz
power consumption at 120 V	50 W
power consumption at 230 V	53 W
inrush current at 120 V	0.2 A
inrush current at 230 V	0.3 A

Light Source

LED power	22 W
LED current	1, 360 mA
LED lifespan	50, 000 hrs

Photo Optic

luminance at 1m	1, 530 lux
beam angle	15°

Thermal

maximum ambient temperature	104° F

Weight and Dimensions

length	17.4 in
width	10.1 in
height	5.6 in
weight	10.2 lbs