What to do if my Chauvet Flood Light does not power up?
If your Chauvet Flood Light doesn't power up, there are several potential causes: * **No power from the outlet:** Test the outlet or try a different one. * **Faulty power cord:** Inspect the power cord for any damage. * **Blown fuse:** Replace the blown fuse with a new one of the same type and rating. * **Internal issues:** In this case, the product should be sent for repair.
Why does the circuit breaker keep blowing with my Chauvet Flood Light?
If the circuit breaker or fuse keeps blowing for your Chauvet Flood Light, it could be due to: * **Excessive load:** Ensure the total load on the circuit does not exceed 80% of the breaker or fuse's nominal current. * **Short circuit:** Inspect the power lines and power cords for any shorts.
Details power requirements, voltage compatibility, and connection safety.
Step-by-step instructions for safely replacing a blown fuse.
Recommended cleaning procedures to maintain the fogger's performance and longevity.
Details power supply type, voltage, consumption, fuse size, and rating.
Key operational metrics like fluid consumption, fog output, and heat-up time.
Power| ac power voltage | 115VAC 60Hz or 230VAC 50Hz |
|---|---|
| fuse | 2A 250V |
| power consumption | 445W (3.7A) max @ 120V |
Operating Environment| maximum ambient temperature | 104°F |
|---|
Weight and Dimensions| length | 8.5 in |
|---|---|
| width | 7.1 in |
| height | 4.9 in |
| weight | 4 lbs |
To Next Page
