Need help?Do you have a question about the Chauvet LEDrain 56 and is the answer not in the manual?
Explains the auto-switching power supply and voltage compatibility.
Provides essential safety guidelines for installation, usage, and maintenance.
Guides on linking multiple units in Master/Slave configuration for synchronized operation.
Instructions on how to connect fixtures in a daisy chain using DMX cables.
Details functions controlled by dipswitches for different modes.
Specific dipswitch settings for older versions of the fixture.
Explains how to set the DMX start address using dipswitches.
Provides basic information about the DMX-512 protocol and its application.
Specifies power supply voltage, consumption, and inrush current.
Outlines data input/output, DMX configuration, and protocols.
Power| auto-switching power supply | 100~240 VAC 50/60 Hz |
|---|---|
| power consumption | 12 W, 0.1 A |
| inrush current | 0.2 A |
Light Source| LED total | 108 |
|---|---|
| red LEDs | 36 |
| green LEDs | 36 |
Weight and Dimensions| length | 7.5 in (191 mm) |
|---|---|
| width | 9.3 in (234 mm) |
| height | 10.3 in (260 mm) |
| weight | 3.3 lbs (1.5 kg) |
To Next Page
