What to do if my Chauvet Light Fixture has no power?
If your Chauvet Light Fixture isn't powering on, first, ensure that the power is reaching the mains. Then, check the device's fuse, both internal and external.
Why does the breaker/fuse keep blowing on my Chauvet Light Fixture?
If the breaker or fuse keeps blowing on your Chauvet Light Fixture, check the total load placed on the device.
How to fix a Chauvet Light Fixture that is not responding?
If your Chauvet Light Fixture isn't responding, check the DMX Dip switch settings for correct addressing, inspect the DMX cables, and verify the polarity switch settings.
What to do if I have a loss of signal with my Chauvet Light Fixture?
If you're experiencing signal loss with your Chauvet Light Fixture: * Use only DMX cables. * Install a terminator. Also, keep DMX cables separated from power cables or black lights.
Why is the beam very dim on my Chauvet Light Fixture?
If the beam on your Chauvet Light Fixture is very dim or not bright, try cleaning the optical system or replacing the lamp. Also, check the 220/110v switch for the proper setting.
What to do if Chauvet Light Fixture is on but there is no movement to the audio?
If your Chauvet Light Fixture is on but not responding to the audio, ensure you have the correct audio mode selected on the control switches. If the audio is provided via a ¼” jack, verify that a live audio signal exists and adjust the sound sensitivity knob.
Why do the lamps cut off sporadically on my Chauvet Light Fixture?
The lamp may be at the end of its life, or the fixture is overheating. It could also be a bad lamp.
What to do if Chauvet Light Fixture will not come on after power failure?
Some discharge lamps require a cooling-off period before the electronics in the fixture can kick-start it again. Wait 5 to 10 minutes before powering up your Chauvet Light Fixture.
How to resolve auto shut off on Chauvet Light Fixture?
Check the fan thermal switch reset.
Contents of the fixture package.
Procedures for safely unpacking the fixture.
Information on connecting the fixture to mains power.
Contact details for Chauvet technical support and general information.
Key capabilities and technical characteristics of the MiN Spot.
DMX channel assignments for 13-channel and 5-channel modes.
Identification of the fixture's main components.
Steps for replacing the fuse and linking fixtures for data transmission.
DMX cable types, connectors, and 3-pin to 5-pin conversion details.
Instructions for connecting fixtures in a DMX serial data link.
Fixture linking in Master/Slave mode and mounting/rigging instructions.
Guide to using the control panel buttons, display, menu map, and configurations.
How to adjust user-specific fixture settings.
Functions for resetting the fixture and restoring factory defaults.
Various modes like Auto, Master/Slave, Easy Controller, and DMX.
Basic explanation of the DMX-512 control protocol.
Recommendations for cleaning and maintaining the fixture.
Process for returning merchandise for repair or replacement.
Procedure for filing claims for damaged or missing parts.
Power| power settings | 120V 60Hz AC or 230V 50Hz |
|---|---|
| fuse | 2A 250V |
| power consumption | 68.1W |
| inrush power | 83.6W |
| power factor | 0.92 |
Light Source| led power | 14W |
|---|---|
| led lifespan | 50, 000hrs |
Photo Optic| beam angle | 13° |
|---|---|
| luminance at 1m | 100fc |
Range| pan | 540° |
|---|---|
| tilt | 270° |
Operating Environment| maximum ambient temperature | 104°F |
|---|
Weight and Dimensions| length | 6.8 in |
|---|---|
| width | 6.8 in |
| height | 9.8 in |
| weight | 8.3 lbs |
To Next Page
