To Next Page
T
Tara MeyerAug 18, 2025
How to fix a dim beam on a Chauvet TFX-FS360?
- DDerek CraneAug 18, 2025
If the beam of your Chauvet Spotlight is very dim or not bright, clean the optical system or replace the lamp.
How to fix a dim beam on a Chauvet TFX-FS360?
If the beam of your Chauvet Spotlight is very dim or not bright, clean the optical system or replace the lamp.
What to do if my Chauvet Spotlight has no power?
If your Chauvet Spotlight has no power, first ensure that the power is on at the mains. Then, inspect the device's fuse, both internal and external, to see if it needs replacing.
How to fix a Chauvet Spotlight that is not responding?
If your Chauvet Spotlight fixture is not responding, check the DMX dip switch settings to ensure they are correctly addressed. Also, inspect the DMX cables and polarity switch settings.
How to troubleshoot loss of signal in Chauvet TFX-FS360 Spotlight?
If you experience a loss of signal with your Chauvet Spotlight, ensure you are using only DMX cables. Install a terminator. Keep DMX cables separate from power cables or black lights.
Why do the lamps cut off sporadically in my Chauvet TFX-FS360 Spotlight?
If the lamps in your Chauvet Spotlight cut off sporadically, it could be due to a bad lamp or the fixture overheating. The lamp may also be at the end of its life.
What to do if Chauvet TFX-FS360 Spotlight's breaker keeps blowing?
If your Chauvet Spotlight's breaker or fuse keeps blowing, check the total load placed on the device.
What to do if Chauvet TFX-FS360 won't turn on after power failure?
If your Chauvet Spotlight's light will not come on after a power failure, some discharge lamps require a cooling off period before the electronics in the fixture can kick start it again. Wait 5 to 10 minutes before powering up.
Why are the motor movements jerky on my Chauvet TFX-FS360 Spotlight?
If you experience jerky or jumpy motor movements in your Chauvet Spotlight, it could be due to a bad motor driver or sensors. Check the polarity switch on the controller.
How to fix no flash on Chauvet TFX-FS360?
If your Chauvet Spotlight is not flashing, reinstall the bulb, as it may have shifted during shipping.
What causes no light output in a Chauvet Spotlight?
If your Chauvet Spotlight has no light output, check the slip ring and brushes for contact. Install a bulb. Call a service technician.
Information on power requirements, voltage matching, and grounding.
Essential safety precautions for installation, usage, and maintenance.
Instructions for installing and replacing the fixture's lamp.
Details on power connection, voltage matching, and grounding.
Details how to operate the fixture in manual followspot mode.
Guide to setting the DMX starting address for fixture control.
Power| voltage (US) | 120 V |
|---|---|
| voltage (European Version) | 230 V |
| lamp power | 360 W |
Lighting and Optics| luminance at 1 meter | 48, 420 lux |
|---|---|
| beam angle | 2° ~ 12° |
| lamp voltage | 82 V |
Weight and Dimensions| length | 572 mm |
|---|---|
| width | 292 mm |
| height | 162 mm |
| weight | 9.3 kg |
