2
MEANING OF SYMBOLS USED IN THE INSTRUMENT
: WARNING ! Please refer to the User's Manual before using the instrument.
In this User's Manual, the instructions preceded by the above symbol, should they not be carried out as shown, can
result in a physical accident or damage the instrument and the installation.
: Earth
: Double insulation
: Conform to WEEE 2002/96/EC standard
Thank you for acquiring a C.A 8332B or C.A 8334B three phase power quality analyser.
To obtain the best possible service from your instrument :
■■
■■
■ read these operating instructions carefully,
■ comply with the precautions for use.
PRECAUTIONS FOR USE
■ Read carefully all the notes preceded by symbol.
■ If you don't use this instrument according the user's manual, you can compromise the safety, and you can go in dangerous
situation.
■ The safety of all the system which include this instrument is the system owner responsability.
■ For your safety, use only tests leads delivered with the instrument : they are conform to EN 61010-031 (2002) standard.
■ Before each use, check the good state of test leads.
■ For your safety, use only accessories delivered with the instrument or approuved by the supplier.
■ Respect the climatic conditions for use (see § 6).
■ This instrument can be used on category-IV installations for voltages not exceeding 600V (AC or DC) in relation to the earth
(as per EN 60664-1).
■ The use of accessorie (sensor) with lower category (CAT III for example) reduce the set use (Instrument with sensor) at this
category (CAT IV begin CAT III for example).
■ Ensure the measurement leads and sensors are disconnected before removing the battery.
■ Use battery packs supplied by the maker.
INSTALLATION CATEGORIES
Definition of installation categories (cf IEC 664-1 publication) :
CAT III : CAT III circuits are power supply circuits that can support major transient overvoltage.
Example : industrial unit or machine power supply.
CAT IV : CAT IV circuits can support very hight transient overvoltage.
Exemple : power input.
WARRANTY
Our guarantee is applicable for three years after the date on which the equipment is made available (extract from our General
Conditions of Sale, available on request).
To Next Page
Loading...
Need help?
General
