Need help?Do you have a question about the Chauvin Arnoux F11N and is the answer not in the manual?
General| Category | Clamp Meter |
|---|---|
| Model | F11N |
| Brand | Chauvin Arnoux |
| Display Type | LCD |
| Jaw Opening | 30 mm |
| Measurement Functions | AC Current, AC Voltage, DC Current, DC Voltage, Resistance, Continuity, Frequency |
| Frequency Range | 10 Hz to 1 kHz |
| Safety Standard | IEC 61010-1 |
| Battery Type | 2 x AAA |
Explains shared functions and features of the F11N and F13N multimeter clamps.
Details specific functions available exclusively on the F13N model.
Specifies the environmental and operational conditions for accurate measurements.
Explains the function for capturing and displaying maximum measured values.
Describes the function to record and display the current measurement value.
Details the type of battery used and its expected service life and consumption.
Describes the buzzer's function for continuity tests and its sound level.
Specifies operating conditions (temperature, humidity, altitude) and storage guidelines.
Outlines electrical safety compliance, including dual insulation and pollution degree.
Covers electromagnetic compatibility standards related to emission and immunity.
Details the mechanical protection rating, specifically the degree of tightness (IP30).
Provides step-by-step instructions for safely replacing the instrument's battery.
Offers guidance on how to properly clean the multimeter clamp and its jaws.
Explains the importance of regular calibration and how to arrange for it.
Directs users on how to proceed with repairs for instruments under or out of warranty.
To Next Page