CHC i80 Maintenance Manual

- 12 -
7:Tilt problem
7.1 Cannot detect the tilt nodule cannot proceed the tilt alignment.
Detection Method&Solution:
(1) Tilt module broken, it cannot work, cannot alignment if yes please replace the
mainboard.
(2) Receiver register code overdue cause the tilt module not work if yes please
re-register the receiver.
(3) Mainboard power supply error please measure the voltage FB8 standard voltage
3.3V, if the voltage not correct, the power supply have some problem, please replace
the mainboard
FB8：

CHC i80 Specifications

General

Brand	CHC
Model	i80
Category	Receiver
Language	English