Need help?Do you have a question about the Check Point PB-10 and is the answer not in the manual?
Provides guidelines for safely installing appliances in a rack environment.
Lists the physical dimensions (width, depth, height) of the 3000 appliances.
Instructions on connecting the appliance to a power source to turn it on.
Guides users through the First Time Configuration Wizard for setup.
Steps to configure the 3000 Appliance as a Security Gateway object in the management server.
Covers advanced configuration options available on Gaia through the Portal or CLI.
Provides methods for connecting to the command line interface via SSH or serial console.
Step-by-step guide to restore the appliance to factory defaults using the Gaia Portal.
Instructions for restoring the appliance to factory defaults via the Boot Menu.
Procedures for reverting the appliance to factory defaults using the Gaia Clish command line.
General| Model | PB-10 |
|---|---|
| Category | Gateway |
| Maximum Number of Users | 50 |
| Form Factor | Desktop |
| Power Supply | External |
| Ports | 4 x 1GbE |
| Interfaces | 4 x 1GbE |
To Next Page