Checkme O2 Oxiband - Tracking and Recording Vital Signs; Smart Vibration Feature

8
2.6 Tracking and Recording the Vital Signs
After the mode has been chosen, the SpO
2
and pulse rate will
be displayed on the screen. The SpO
2
, pulse rate and motion
data will be automatically stored in the monitor with 2s interval.
The device can store maximum 4 records. The oldest record
will be overwritten when the 5
th
record is coming in.
2.7 Smart Vibration
The monitor will monitor the SpO
2
level and steps during the
recording. If the vibration is ON, the vibrator in the sensor will
be activated when the SpO
2
fall below the pre-set value
(Threshold) or meet steps goal. The vibration will stop when the
SpO
2
reading go back to normal range, or you can press the
button to stop it.