2
using this device, you should consult your doctor immediately if you
experience symptoms that could indicate acute disease.
Do not self-diagnose or self-medicate on the basis of this device
without consulting your doctor. In particular, do not start taking any
new medication or change the type and/or dosage of any existing
medication without prior approval.
Use only cables, sensors and other accessories specified in this
manual.
Prolonged continuous SpO
2
monitoring may increase the risk of
undesirable changes in skin characteristics, such as irritation,
reddening, blistering or burns.
Check the SpO
2
sensor application site every 6-8 hours to determine
the positioning of the sensor and the circulation and skin sensitivity of
the patient. Patient sensitivity varies depending on medical status or
skin condition. For patients with poor peripheral blood circulation or
sensitive skin, inspect the sensor site more frequently.
Functional tester cannot be used to assess the accuracy of a SpO
2
sensor or a device.
To Next Page
Loading...
Need help?
General