4
RJ14-UB
BEFORE FIRST USE
1. Remove all packing materials and stickers from the inside and outside of the
InstaCoffee. Be sure that all parts are included before throwing out packaging.
2. Gently wipe down exterior with a damp cloth or paper towel. Never immerse
the InstaCoffee, its base, cord, or plug in water or any other liquids. The electrical
connections and the brew button must never come into contact with water or any
other liquids.
3. Remove the capsule receptacle and reusable coffee filter from the capsule receptacle
holder. Rinse the coffee filter with water. Wash the capsule receptacle with a sponge
and warm, soapy water. Dry completely.
4. Before brewing coffee for the first time, use the instructions below to brew a full,
14-oz cup of hot water with NO coffee grounds. This will prime the InstaCoffee for use
and clean out any dust that may have accumulated before use.
5. Read all instructions and follow them carefully.
1. Insert the empty capsule receptacle into the capsule receptacle holder in the brew
chamber.
2. Fill the water tank. Do not exceed the MAX fill line (14 oz).
3. Plug in the InstaCoffee.
4. Place a large mug or travel cup on the base of the InstaCoffee and press the brew
button. Do not remove mug until brew indicator light stops flashing and turns off.
Operating Instructions
1 3
4
2
To Next Page
Loading...
Need help?
General
