Page 7
INSTALLATION AND PROPER GROUNDING
THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG. THE OUTLET TO
WHICH THIS PLUG IS CONNECTED MUST BE PROPERLY GROUNDED. IF THE RECEPTACLE
IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT UNDER ANY
CIRCUMSTANCES CUT OR REMOVE THE THIRD GROUND PRONG FROM THE POWER CORD
OR USE ANY ADAPTER PLUG (Fig. 7-1 and Fig. 7-2).
5. Post the Chefmate slicer safety tips within easy view of the operator.
6. Inspect the slicer to ensure all parts have been provided.
7. Make sure the knife cover and sharpener are in place.
8. Make sure the warning label is properly positioned and legible and the owners manual is available
near the slicer.
9. Complete warranty card and mail to Globe.
10. Clean the slicer using the procedures outlined in the cleaning section (pages 9 and 10) prior to
using the slicer.
11. Contact your local representative or Globe directly if you have any questions or problems with the
installation or operation of this slicer.
Figure 7-1 Correct Figure 7-2 Incorrect
To Next Page
Loading...