Cherry Aerospace G83 - G83 Pulling Heads

7
G83 PULLING HEAD SELECTION CHART
MAXIBOLT PULLING HEADS
CHERRYMAX® ADAPTER AND PULLING HEADS
PULLING
HEAD
PART NO.
CHERRYMAX®
DIAMETER
ADAPTER
STRAIGHT
H701B-456 -4, -5, -6 744-300
H781-456
-4, -5, -6
744-300
H782
-4, -5, -6
744-300
RIGHT ANGLE
H753A-456 -4, -5, -6
744-300
OFFSET
H513SRC-06-35 STRAIGHT PULLING HEAD
The H513 series pulling heads are available to accommodate the 1/8" diameter through 1/4" diameter lockbolts in varying lengths.
The pictured head assembly is swivel-nose, self-releasing, chisel nose with a length of 3.5 inches from the riveter line.
FOR MOUNTING AND OPERATING INSTRUCTIONS SEE PULLING HEAD TOOL SHEETS.
PULLING
HEAD
MAXIBOLT
DIAMETER
ADAPTER
-5
-6
-5 & -6 MB Plus
-5 744-200
-6 744-200
H84B-568
N/ASTRAIGHT
H828-5MB
H828-6MB
RIGHT
ANGLE
PART NO.
H83B-5MB/5MBU
H83B-6MB/6MBU