• The set gives a beep and then mute,
the displayer is blinking.
• When it has finished, you hear a beep
followed by the station stored on pre-
set 1-6, and the displayer stops blink-
ing.
• Sometimes it may not be possible to
find 6 stations.
Preset Stations (1-6)
Six stations per band can be stored
and recalled using the preset buttons
(1 to 6).
• Tune in to the desired station.
• Press the desired preset button (1 to
6) for more than 2 seconds (till you
hear a ⬙beep⬙) to store the current
tuned station into.
CD Player Operation
CD Play
Press CD button to enter the 6 discs
CD player mode.
Displayer shows:
• Audio mode (if selected)
• CD playing symbol
• Current playing track number, played
time.
Scan Track
The scan function enables you to lis-
ten to the first 10 seconds of each
track.
• Press SCN button to activate Scan
Track.
• Press SCN button again to deactivate
Scan Track.
Previous / Next Track
• Press Next/Previous Track button to
select the next / previous track.
• CD player resumes to play mode af-
ter the selection is completed.
Fast Backward / Forward
• Press the Rewind or Forward button
to quickly move rewind or forward
through the disc.
• Press the Rewind or Forward button
again to return to CD play mode.
Random Track Play
• Press RANDOM button more than 2
seconds to enter random tack play
mode.
• Press RANDOM button again to exit
the random track play mode.
Repeat Track Play
• Press REPEAT button more than 2
seconds to enter repeat current track
play mode.
• Press REPEAT button again to exit the
repeat track play mode.
Eject Disc
Press Eject button to eject the disc.
Maintenance for CD
• Avoid making fingerprints on the disc
when you take it out.
• Put the disc back in its box immedi-
ately after eject it, to protect the disc
from dirty and dust.
90 – YOUR INSTRUMENT PANEL
Chery Automobile Co., Ltd.
To Next Page
Loading...
Need help?
General
