Audio
106
Disc Play
When press key, the system will
enter into disc play function and will
automatically detect the disc contents in
the DVD-ROM drive. During this period,
the system pre-reading time will be much
longer. At that moment, there has one
transitional interface as shown in
following figure.
When the drive has no disc, the system
will display “No Disc” symbol as shown
in the following figure.
This device may not respond to the user’s operation during loading disc
data. Please refer to the table for the operations of function keys. The keys
not included in the table will have no response.
To Next Page
Loading...
